Nikon D200 Repair Manual page 54

Front cover unit
Aperture coupling-ring unit
Bayonet
・ Assemble the aperture coupling-ring (#RP1) into the
apron (#22), and attach the spring (#406) and roller
(#407). Then mount this assembled unit on the front
body by turning slightly clockwise, and fi x it with two
screws (#1514) and two screws (#66).
#26
Be careful NOT to
・bend the brush of the aperture
coupling-ring (#RP1).
・drop the roller (#407).
・dirt the pattern of the F-F0 PCB
unit (#B1024).
Grease: G-92KA
Change page △ ×1
Oil barrier: OS-30MF
#980
#38×2
#407
#773
#22
#406
#RP1(404,405)
Caution: After mounting the bayonet, press the lens release-pin and
confi rm that the pin moves smoothly without catching.
- Ａ14 ･
Drysurf: AX-115
#40
#37
#389
#1551
△(Addition）
#383
#1514
Apply to the holes on the
back side.
#66
#402
-
INC
VBA13001-R.3677.A
Drysurf: AX-115
#388
Oil barrier: OS-30MF
#401
#1621×4
#1620
サービス
計画課
Ｍ
JUL.7.2006