Accuracy Inspection And Adjustment (Camera Body) - Nikon D200 Repair Manual

Accuracy inspection and adjustment (Camera body)

Stabilized power supply
Set value ＝ 7.4V 0.3Ω 5.0A
or AC adapter EH-6
Battery tool
J15423
★
＊ Note:
When checking "battery check", be sure to use the battery tool (J15423).
When this tool is used, LCD indications of camera disappear.
Shutter tester
When Ｍ 1/8000 is adjusted, use the T.V.measuring adapter (APS) EF-8000(J19042E) and the light receiving adapter
(J61199).
Caution: When the inspection and adjustment are made with the shutter tester, turn the tester ON to light a lamp, and carry
out the aging for 3-5 minutes.
★ : Newly prepared RJ
J61199
Light receiving adapter (in common with D100)
J19042E
T.V.measuring adapter (APS) EF-8000
Traditional adapter for camera
- Ａ38 ･
Commercially available straight cable
★
J18397
D200 inspection and adjustment software
Use [9pin-25pin] conversion connector for a
computer with 9-pin RS-232C terminal.
RJ is not available, so use a commercial item.
Flash meter
Not prepared as RJ
★
AE-CCD J15427
Set up in front of color viewer (J63070)
★
AF50/1.4D
-
INC
VBA13001-R.3677.A
To RS232C terminal
AF28/2.8D