D200 Inspection And Adjustment Software (J18397); Operating Environment; Cautions In Starting Program; Procedure For Installation - Nikon D200 Repair Manual

D200 Inspection and Adjustment Software (J18397)

This inspection and adjustment software runs on Windows.
Install the software by following the below procedure.
<Operating environment>
Check the following operating environment which is required for installing this program on PC.
PC IBM PC/AT compatible
OS Windows XP Professional Edition, Windows XP Home Edition,
Windows2000, Windows 98 Second Edition (SE)
CPU 80486 100MHz ～ Pentium 4 2.2GHz
RAM (memory) 32MB or more
HD 6MB-or-more free disk space is required when installing
Monitor resolution 800×600 pixels or more
Interface Serial interface (switchable from COM1 to COM9)
※ USB interface is not available.
As long as the above hardware requirements are met, any PC such as desktop or laptop, etc is available.
＜ Cautions in starting program ＞
When starting this program, close all the other applications.
If some other applications are running, this program may not be activated.
<Procedure for installation>
The file (D200SOFT.EXE) of this program is provided via FD or e-mail.
Because this is the self-extracting file, decompress the file before installing, following the next procedure.
1. Create a folder for installation under a name you like and PC drive.
(e.g.) C:\D200
- Ａ39 ･ -
INC
VBA13001-R.3677.A