Configuring The Server And Http Ports; Configuring The Rtsp Service Port; Telnet Setup; Ip Address - Interlogix TruVision DVR 12 User Manual

Chapter 6: Network settings
To set up multicasting:
1. From the menu toolbar, click
2. Enter a Multicast IP address.
When adding a device to the Network Video Surveillance software, the
Note:
multicast address must be the same as the DVR's multicast IP.
3. Click to save the settings.
Apply

Configuring the server and HTTP ports

You can change the server and HTTP ports from the default settings in the
Network Settings window. The default server port is 8000 while that of the default
HTTP port is 80.
The server port has a port range of 2000 to 65535 and is used for remote
Note:
client software access. The HTTP port is used for remote internet browser
access.
To change the default ports:
1. From the menu toolbar, click
2. Enter the new Com Port and HTTP Port values.

Configuring the RTSP service port

The RTSP (Real Time Streaming Protocol) is a network control protocol
designed for use in entertainment and communications systems to control
streaming media servers.
To configure RTSP service port:
1. From the menu toolbar, click
2. Enter the RTSP port value. The default value 554.
3. Click to save the settings.
Apply

Telnet setup

For Technical Support only.
40
>
Network Settings
>
Network Settings
>
Network Settings
More Settings.
More Settings.
More Settings.
TruVision DVR 12 User Manual