Getting Started; Turning On And Off The Dvr - Interlogix TruVision DVR 12 User Manual

Chapter 3

Getting started

Turning on and off the DVR

Before starting the power up process, connect at least one monitor to the video
out or the VGA interface. Otherwise, you will not be able to see the user interface
and operate the device. Also connect at least one camera.
The DVR auto-detects the video mode (PAL or NTSC) on startup.
It comes equipped with a universal power supply that will auto-sense 110/240 V,
60/50 Hz.
It is recommended that an uninterruptible power supply (UPS) is used in
Note:
conjunction with the device.
To turn on the DVR:
Turn on the DVR using the power switch on the back panel. Once
up, the status LEDs on the front panel will light up. All connected cameras are
displayed on-screen. The DVR automatically begins recording.
To turn off the DVR:
1. In live view mode, right-click the mouse and click Menu. The main menu
window appears.
2. Select the
Power Manager
3. In the Shutdown popup menu, select Shutdown. Click
shutdown.
To reboot the DVR:
1. In live view mode, right-click the mouse and click Menu. The main menu
window appears.
2. Select the
Power Manager
3. In the Shutdown popup menu, select Reboot. Click
TruVision DVR 12 User Manual
icon.
icon.
it is powered
to confirm
Yes
to confirm shutdown.
Yes
13