Configuring An Ntp Server - Interlogix TruVision DVR 12 User Manual

Chapter 6: Network settings
name obtained from the DynDNS web site. Then enter your user name and
password registered in the DynDNS network.
For example:
Server address: members.dyndns.org
Domain: mycompanydvr.dyndns.org
User name: myname
Password: mypassword
- Or -
ezDDNS: Click the
displayed. If no host name is specified, the DDNS will allocate one
automatically.
The maximum length for the host name field is 63 characters. This limit does
not include tvn-ddns.net. An example of a host name could be
max63chars.tvr-ddns.net.
4. Ask your ISP service provider for your DNS server address.
Go to
Network Settings
DNS server addresses.
5. Click to save the settings.
Apply

Configuring an NTP server

A Network Time Protocol (NTP) server can also be configured on your DVR to
keep the date and time current and accurate.
Note: If the device is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44) or europe.ntp.pool.org. If the
device is setup in a more customized network, NTP software can be used to
establish a NTP server used for time synchronization.
To set up an NTP server:
1. From the menu toolbar, click
2. Check the NTP box to enable feature. It is enabled by default.
3. Enter the NTP settings:
36
button. The URL address to access the unit is
Get URL
> and enter the preferred and alternate
General
Network Settings
> NTP.
TruVision DVR 12 User Manual