Gearbox - BMW R 1150 RT Repair Manual

•
Remove the rear ABS sensor.
d
Warning:
Integral ABS When removing and installing the
brake calipers, force back the pistons carefully to
ensure that the wheel-circuit reservoir does not
overflow.
If fluid escapes, proceed in accordance with "In-
structions for filling reservoir" (
•
Remove rear brake caliper.
•
Use cable ties to secure the brake caliper to the
rear frame.
•
Disconnect clutch-system bleed line from rear
frame.
•
Remove cable ties (5) from left air filter box.
•
Tilt the rear frame up and secure it in this position
with a strap attached to the handlebars.
•
Remove spring strut.
21.6
00.48).
a
•
•
•
•
•
•
•
5
R22210040
•
•
RS230310
17 5 500
Use hose clip pliers, BMW No. 17 5 500, to dis-
connect hose for crankcase breather from air-fil-
ter box.
Remove air filter box.
Remove the fuel distributor.
Remove clutch slave cylinder.
Remove clutch pushrod.
Remove rear battery carrier fasteners.
Disconnect ground cable below the battery car-
rier.
23 1 820
23 1 820
Always use oiled guide pins, BMW No. 23 1 820,
when removing or installing the gearbox.
Remove the rear wheel, rear wheel drive and
swinging arm together with the gearbox.
R21110020
RS230011