Checking valves for wear
•
Clean combustion residue from valves.
•
Check valve dimensions (
Remachining valve seat
D
e
Attention:
Width (B) and diameter (D) must always be main-
tained if valve seat is machined (
Checking and repairing cylinder head
•
Remove combustion residue from combustion
chamber.
•
Check sealing face for damage/distortion, and
machine if necessary.
Milling head mating surface:
.................... max. 0.2 mm (0.008 in) metal removal
Checking valve guide for wear
•
Check valve guide bore (
11.6).
a
RS110890
11.7).
a
11.7).
a
11.29