BMW R 1150 RT Repair Manual page 235

Removing and installing
32 71 165
handlebars
Removing and installing left
32 71 150
handlebar
d
Warning:
Do not disassemble the handlebars.
•
Remove the lower section of the left grip unit.
•
[Radio] Remove handlebar remote-control unit.
•
Release left multi-function switch from grip unit.
•
[Heated grips] Remove left heated grip.
•
Release fastener securing left handlebar to fork
bridge.
e
Attention:
To prevent air from entering the hydraulic system,
keep the grip unit horizontal.
•
Slacken left handlebar grip unit.
•
Remove left handlebar, remove grip unit and
keep it horizontal.
•
Installation is the reverse of the removal proce-
dure.
•
Align the grip unit with the punch mark (arrow) on
the handlebar.
e
Attention:
Make sure that all lines and cables are correctly
routed.
X
Tightening torque:
Handlebar weight to handlebar .................... 21 Nm
Handlebars to fork bridge............................. 21 Nm
R22320040
32.13