Using The Booklet Mode - Kyocera Mita S-9100DN Operation Manual

3.3 Using the Booklet Mode

If you select Booklet Mode, double-sided pages with the stitch-
ing areas will be printed. When selecting Booklet Mode with the
document finisher DF-75, double-sided stitching print will be
done.
NOTE
Stitching print supports the print sizes: A3, Ledger, B4, A4-R and
Letter-R.
1
In the Print dialog, click the Properties button and
then click the Output tab.
2
Select Finisher [Face-down] as Output to.
3
Click the Layout tab, and then check the Booklet
Mode box, then select Left Edge Binding or Right
Edge Binding.
4
Click the Output tab, and then check the Staple box.
Booklet is automatically selected.
5
Click the OK button. The Print dialog box is displayed
again.
6
Click the OK button to start printing.
Chapter 3 Printing Through Application Software
3-6