Using The Operator Panel; Menu Selection System - Kyocera Mita S-9100DN Operation Manual

2. Using the Operator Panel

This section explains how to use the menu selection system. The MENU key on the operator panel allows you to use the menu to set
or change the printer environment such as the number of copies to print, emulation, etc., to your specific needs. Settings can be made
when Ready is indicated on the printer message display.
The printer obeys the most recently received printer settings sent from the application software, or from the printer driver, which take
priority over operator panel settings.

2.1 Menu Selection System

The following is the hierarchy diagram of the menu selection system of the printer. The vertical transition is made with the 3 and 4 keys
and horizontal transition is made with the 2 and 1 keys. To change or finalize configuration on an item, use the ENTER key.
Ready
PAR A4 PLAIN
MENU Key
Print Ready
PAR A4 PLAIN Menu Map
Print
Status Page
e-MPS >
Continued on the next page
These items will not appear unless the printer is installed with the applicable option.
>Quick Copy
>Private/Stored
>Print VMB Data
>List of VMB
>List of
Code JOB
>e-MPS >
Configuration
Chapter 3 Using the Operator Panel
>>Quick Copy
32
>>Temp. Code JOB
Size
0500MB
>>Perm. Code JOB
Size 0500MB
>>VMB Size
0500MB
3-4