Kyocera Mita S-9100DN Operation Manual page 62

5
Press the ENTER key. A blinking question mark (?) ap-
pears.
>Type Adjust
? Custom 1
6
Press the 3 or 4 key to display the desired paper type.
The display changes as shown below.
Custom (1 to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
7
When the paper type to be customized is displayed,
press the ENTER key.
8
Press the 2 key and proceed to
Weight on the following page.
Q Q Q Q Setting the Paper Weight
You can set the paper thickness for your custom paper type to
be customized.
1
Display the custom paper type (see
3-45) and press the 2 key.
Type on page
2 Press the 3 or 4 key repeatedly until >>Paper
Weight appears.
>>Paper Weight
Normal
3
Press the ENTER key. A blinking question mark (?) ap-
pears.
>>Paper Weight
? Normal
4 Press the 3 or 4 key to display the desired paper
thickness. The display changes as shown below. For
details of the default setting for each paper type, see
Paper Type on page
Normal
Heavy (Thick)
Extra Heavy
Light (Thin)
>
Setting the Paper
Customizing Paper
5-5.
Chapter 3 Using the Operator Panel
5
When the desired paper thickness displayed, press the
ENTER key.
6
Press the MENU Key. The message display returns to
Ready.
Q Q Q Q Setting the Duplex Path
If the paper type is set to Custom, you can set whether or not to
enable duplex printing as follows. The default setting is Enable.
1
Display the custom paper type (see
3-45) and press the 2 key.
Type on page
2 Press the 3 or 4 key repeatedly until >>Duplex
Path appears.
>>Duplex Path
Enable
3
Press the ENTER key. A blinking question mark (?) ap-
pears.
>>Duplex Path
? Enable
4 Select Enable or Disable using the 3 or 4 key. For
details of the default setting for each paper type, see
Paper Type on page
5
Press the ENTER key.
6
Press the MENU key. The message display returns to
Ready.
Resetting the Type Adjust
Resets the custom setting that are set in
Type on page 3-45.
1
Press the MENU key.
2 Press the 3 or 4 key repeatedly until Paper
handling > appears.
Paper Handling >
3 Press the 2 key.
4
Press the 3 or 4 key repeatedly until >Reset Type
Adjust appears.
>Reset Type
Adjust
Customizing Paper
5-5.
Customizing Paper
3-46