Table of Contents
Advertisement
Chapter 3 Printing Through Application Software
4
Specify the number of copies you want to print in the
Number of copies combo box in Copies.
5
Click the Properties button. The Properties dialog box
is displayed. Click the Output tab and then click the
Job Settings button.
The Job Settings dialog box will appear.
6
Check the Job Storage checkbox, and then check the
Private Print.
3-13
7
Set the desired 4-digit access code using any numbers
between 0 and 9. This number is synonymous with the
user ID which is required to enter at the printer opera-
tor panel when retrieving.
8
Click the OK button. The Print dialog box is displayed
again. Click the OK button. The print job will be stored
to the hard disk without printing.
To print, use the Private/Stored sub menu in the
e-MPS menu at the printer operator panel. For details,
see
Chapter 3 in the Operation
Job Storage (Stored Job Printing)
Select this if you want to store frequently needed print jobs, such
as forms, to print them later as required. The print jobs will not
be deleted when the printer is turned off.
To print, proceed as follows.
1
Browse File > Print. The Print dialog box will be dis-
played.
2
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX.
3
Select the range of the pages you want to print in the
document, All or Current page in Page range. To print
part of the document, check Pages, then enter page
numbers separated by commas.
Guide.
Advertisement
Chapters
Table of Contents
