Installation Overview; Recommended Installation Procedure - Travis Industries 564 HO GSR2 Installation Manual

8

Installation Overview


All requirements below must be met.
See the section
"Mantel Requirements"
Side
Wall
See "Optional Non-
Combustible Facing"

Recommended Installation Procedure


Frame the opening for the fireplace. Make sure to allow for vent installation.

This fireplace is designed to accommodate 1/2" (13mm) or 5/8" (16mm) drywall (see "Nailing
Brackets" on page 11 for details). Secure the fireplace to the framing.

Install the vent, gas line and electrical hook-up.

Install the drywall.

Install the hearth (if applicable).

Install the facing (if applicable).

Install the mantel (if applicable).

Finalize the installation (see page 36) and install the grill or face.
© Travis Industries
Installation
(
Drywall
Drywall
12" min.
305mm
See "Optional Non-
Combustible Hearth"
See the section
"Electrical Connection"
for qualified installers only)
See the section
"Vent Requirements"
4141013
See the section
"Approved Vent
Configurations"
Nailing brackets
See the section
"Minimum Framing
Dimensions"
See the section
"Gas Line Installation"
100-01414
8