Sony DNW-A100 Operation Manual page 96

7-2 Basic Menu
Resetting the menu settings to their
factory default values (menu item B20)
Time data display
SET button
1
Set menu item B20 RESET SETUP to ON.
"PUSH SET BTN" appears in the time data
display, and "Push SET button" appears on the
monitor screen.
2
Press the SET button.
The current active menu settings (see page 7-8) are
reset to their factory default settings.
3
Press the SET button again.
The settings are saved and the menu display
disappears from the time data display.
Switching between 525/625 line systems
(menu item 013)
Using the following procedure, you can set basic menu
item 013, 525/625 SYSTEM SELECT, to "ON", and
then switch between 525 (NTSC) and 625 (PAL).
Note
Before carrying out this operation, consult the person
responsible for the installation.
7-6
Chapter 7 Menu System
Limitations when using the DNW-A100/A50/A45 in 625
mode
• Betacam and Betacam SP tape cannot be played back.
• Composite input cannot be recorded.
• When NTSC signals are recorded on the hard disk,
the hard disk cannot be used for recording or
playback. In this case, HD525 is displayed in the time
data display area. In order to use the hard disk again,
use the disk file management menu (see page 7-25) to
delete all files.
• Color frame synchronization with external reference
video signals cannot be performed.
Limitations when using the DNW-A100P/A50P/A45P in
525 mode
• Betacam and Betacam SP tape cannot be played back.
• Composite input cannot be recorded.
• When PAL signals are recorded on the hard disk, the
hard disk cannot be used for recording or playback.
In this case, HD625 is displayed in the time data
display area. In order to use the hard disk again, use
the disk file management menu (see page 7-25) to
delete all files.
• Color frame synchronization with external reference
video signals cannot be performed.
(The following procedure shows by way of example
how to switch from a 525 (NTSC) system to a 625
(PAL) system.)
1
Select menu item 013.
The time data display and the monitor screen
connected to the COMPOSITE VIDEO OUTPUT
3 (SUPER) connector show the following displays.
Time data display
Monitor screen
ITEM-013
525/625 SYSTEM
SELECT
OFF