Sony DNW-A100 Operation Manual page 130

Specifications
Processor adjustment range
Video level ±3 dB/ –∞ to +3 dB selectable
Chroma level ±3 dB/ –∞ to +3 dB selectable
Setup level (DNW-A100/A50/A45)
±30 IRE
Black level (DNW-A100P/A50P/A45P)
±210 mV
Y/C delay ±100 ns (in analog Betacam
playback)
Chroma phase 30°
System phase Sync: ±15 µs
SC: ±200 ns
Input connectors
SDI DIGITAL INPUT
BNC (1 with active through out)
Serial digital (270 Mbits/s)
SMPTE 259M/ CCIR 656-III
SDDI DIGITAL INPUT
BNC (1) (with optional BKNW-
103)
REF. VIDEO INPUT
BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75 Ω, sync negative
COMPONENT VIDEO INPUT
BNC (3 for 1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75 Ω, with
100% color bar for A100P/A50P/
A45P and with 100% or 75%
color bar selectable for DNW-
A100/A50/A45 (with optional
BKNW-104)
COMPOSITE VIDEO INPUT
BNC (2 in loop through
connection)
1.0 Vp-p, 75 Ω, Sync negative
(with optional BKDW-505 for
DNW-A100/A50/A45 or
BKDW-506 for DNW-A100P/
A50P/A45P)
A-4
Appendix
AUDIO INPUT CH-1/2/3/4
XLR 3-pin, female (4)
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm, 600 Ω
termination, balanced
TIME CODE IN XLR 3-pin, female (1)
0.5 to 18 Vp-p, 10 kΩ, balanced
Output connectors
SDI DIGITAL OUTPUT
BNC (2)
serial digital (270 Mbits/ s)
SMPTE 259 M/CCIR 656-III
SDDI DIGITAL OUTPUT
BNC (2) (DNW-A100 /A100P
only)
COMPONENT VIDEO OUTPUT
BNC (3 for 1 set)
Y: 1.0 Vp-p, Sync negative
R–Y/B–Y: 0.7 Vp-p, 75 Ω, with
100% color bar for DNW-A100P/
A50P/A45P and with 100% or
75% color bar selectable for
DNW-A100/A50/A45
COMPOSITE VIDEO OUTPUT
BNC (3 including 1 for character
superimpose)
1 Vp-p, 75 Ω, Sync negative
AUDIO OUTPUT CH-1/2/3/4
XLR 3-pin, male (4)
+4 dBm at 600 Ω load, low
impedance, balanced
MONITOR OUTPUT (L/R)
XLR 3-pin, male (2)
+4 dBm at 60 Ω load, low
impedance, balanced
TIME CODE OUT
XLR 3-pin, male (1)
2.2 Vp-p, low impedance, balanced
PHONES JM-60 stereo phone jack
–∞ to –12 dBu at 8 Ω load,
unblanced