Sony DNW-A100 Operation Manual page 18

2-1 Control Panels
3 Device specification and display section
VI TC UB INTRP A IN DF LTC VITC 8F 4F 2F
1 Fluorescent display and indicators
This comprises a time data display area 1, a time data
display area 2, and an event display area provided by
the fluorescent display, and also a number of
indicators.
Indicator area
CAPSTAN
VI TC UB INTRP A IN DF LTC VITC 8F 4F 2F
Time data display area 2
Time data display area 1
Time data display area 1
Normally this displays a CTL count, time code value,
or user bit value according to the setting of the CTL/
TC/UB button in the monitor/menu/display setting
section 2 and the setting of the TC switch in the
upper control panel.
It is also used to display an IN point (or audio IN
point), a duration, error messages, setup menus, and so
forth.
For details of the selection of CTL count, time code value,
or user bit value see the description of the CTL/TC/UB
button (previous page).
2-10
Chapter 2 Location and Function of Parts
1 Fluorescent display and indicators
2 Device specification buttons and indicators
3 Indicators
CAPSTAN CH
LOCK CONDITION
A OUT TCG TOTAL REMAIN
4 PLAYER button and RECORDER button
CH
LOCK CONDITION
CONFI ON
DOLBY
A OUT TCG TOTAL REMAIN 525 625
NR
EVENT
%
Event display area
FULL
EDIT
CONFI ON
SIMPLE
DOLBY
525 625
NR EDIT
EVENT
REC
%
INHIBIT
KEY
INHIBIT
SERVO
Time data display area 2
This shows a TOTAL time indication or REMAIN
(remaining) time indication according to the setting of
the TOTAL/REMAIN button in the monitor/menu/
display setting section 2. Depending on the display,
the corresponding one of the TOTAL and REMAIN
indicators immediately above lights.
TOTAL/REMAIN indications
Device TOTAL/
subject to REMAIN
operations selection
DISK TOTAL
a)
MASTER
REMAIN
DISK TOTAL
PROGRAM b)
REMAIN
TAPE TOTAL
REMAIN
a) In the following description, "DISK MASTER" is also
referred to simply as "MASTER".
b) In the following description, "DISK PROGRAM" is also
referred to simply as "PROGRAM".
c) This is an approximate value calculated on the basis of
the detected tape diameter. It is not precise to units of
seconds.
DISK
PROGRAM
DISK
BUSY
DISK
MASTER
BETACAM
TAPE
SX
EXT
ALARM
PLAYER RECORDER
Display
Total number of frames recorded
on disk.
Number of frames of remaining
unrecorded capacity of disk.
Total length (frames) of program
created by editing.
Remaining length (frames) of
program during playback.
Time value representing the total
C)
tape length.
Time value representing the
remaining tape length. C)