Sony DNW-A100 Operation Manual page 74

5-3 Multi-Event Editing
Monitoring during editing
During editing, you can monitor the player events in
the same way as in a preview.
Note
When MASTER or PROGRAM is specified as the
player and PROGRAM is specified as the recorder,
executing the multi-event editing causes the program
information to be saved to the hard disk and no image
to be output to the monitor.
Stopping the editing operation (with TAPE or
EXT specified as the player)
To stop a multi-event editing operation in progress,
press the STOP button.
Reviewing the editing results
After carrying out an editing operation, you can carry
out a review, to check the editing results on the
monitor.
To carry out a review, press the PREVIEW/REVIEW
button after carrying out the edit and before you set
any new edit points or make modifications.
The PREVIEW/REVIEW button lights, and the review
is carried out.
At the end of the review the PREVIEW/REVIEW
button goes off, and the recorder returns to the OUT
point of the last event.
5-16
Chapter 5 Editing Using the Built-in Hard Disk