Sony DNW-A100 Operation Manual page 100

7-3 Extended Menu
Item number Item name
106 CAPSTAN LOCK
107 REC INHIBIT LAMP
FLASHING
108 AUTO EE SELECT
109 FORCED EE WHEN
TAPE UNTHREAD
118 KEY INHIBIT SWITCH
EFFECTIVE AREA
Sub-item
118-1 REMOTE
SELECT
118-2 MON./ INPUT
SEL
118-3 CONTROL
PANEL
119 VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL
120 CTL LOCK IN VAR/SHTL
122 AUTO EE WITH ANALOG
TAPE
7-10
Chapter 7 Menu System
Menu items in the 100s, relating to the control panels (continued)
Settings
Select the capstan servo lock mode.
SW : The capstan servo lock mode is determined by the CAPSTAN LOCK switch
on the subsidiary control panel.
2F: The capstan servo locks every two fields regardless of the setting of the
CAPSTAN LOCK switch on the subsidiary control panel.
4F: The capstan servo locks every four fields regardless of the setting of the
CAPSTAN LOCK switch on the subsidiary control panel.
8F (For 625 mode only): The capstan servo locks every eight fields regardless of
the setting of the CAPSTAN LOCK switch on the subsidiary control panel.
Select whether or not to flash the REC INHIBIT indicator when the REC INHIBIT
switch on the subsidiary control panel is set to OFF and the REC inhibit plug on
the cassette is pressed in.
OFF : Do not flash the REC INHIBIT indicator.
ON: Flash the REC INHIBIT indicator.
When a digital cassette is inserted and the PB and PB.EE buttons on the lower
control panel are set to the PB/EE mode, select the VTR modes in which input
video and audio signals are automatically handled in EE mode.
When an analog cassette is inserted, regardless of the menu setting the PB mode
is always selected.
S/F/R : In STOP/EJECT/F.FWD/REW modes
STOP: In STOP/EJECT modes
During tape threading and unthreading, and when no cassette is inserted, select
whether the PB and PB.EE buttons on the lower control panel control the output
signal PB/EE setting.
ON : No control by the PB and PB.EE buttons (the signal is always an EE signal).
OFF: Control by the PB and PB.EE buttons.
Select which switches and buttons can be operated when the KEY INHIBIT
switch on the subsidiary control panel is set to ON. The following sub-items
control different sets of switches and buttons independently.
Select whether the REMOTE/LOCAL switch in the upper control panel is enabled.
DIS : Disabled.
ENA: Enabled.
Select whether the AUDIO INPUT / MONITOR SELECT buttons in the upper
control panel are enabled.
DIS : Disabled.
ENA: Enabled.
Select which switch and button operations can be carried out from the control
panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons are disabled.
EDIT: All switches and buttons for editing operations are disabled.
ENA: All switches and buttons are enabled.
Select the playback speed range when carrying out playback in variable mode
from the control panel of this unit.
OFF : –1 to +1 times normal speed.
ON: 0 to +1 times normal speed.
Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, and 1.0 times normal.
Select whether or not the setting of item 108 also applies to an analog cassette.
Item 108 selects the VTR modes in which input video and audio signals are
automatically handled in EE mode, when a digital cassette is inserted and the PB
and PB.EE buttons on the lower control panel are set to the PB/EE mode.
DIS : When an analog cassette is inserted, always use PB mode.
ENA: When an analog cassette is inserted, follow the setting of item 108.