Sony DNW-A100 Operation Manual page 20

2-1 Control Panels
• 525, 625: The indicator showing the number of
scan lines for the television standard selected
using basic menu item 013 lights (NTSC: 525
scan lines, field frequency 60 Hz; PAL: 625 scan
lines, field frequency 50 Hz).
• DOLBY NR indicator: This lights when the Dolby
1)
noise-reduction circuit is functioning.
• EVENT indicator: This lights when an event is
displayed in the event display area.
2 Device specification buttons
DISK PROGRAM
buttons
DISK MASTER
buttons
TAPE buttons
EXT button
DISK PROGRAM buttons
When using the hard disk of this unit for nonlinear
editing, specify the hard disk as player or recorder.
According as you wish to specify the hard disk as
player or recorder, hold down the PLAYER or
RECORDER button and press the DISK PROGRAM
button on the PLAYER side or RECORDER side,
turning it on.
The device selected by pressing these buttons is also
referred to simply as "PROGRAM".
..........................................................................................................................................................................................................
1) Dolby noise-reduction: Dolby noise reduction
manufactured under license from Dolby Laboratories
Licensing Corporation. " DOLBY" and the double-D
symbol are trademarks of Dolby Laboratories
Licensing Corporation.
2-12
Chapter 2 Location and Function of Parts
Player side Recorder side
DISK
PROGRAM
DISK
MASTER
TAPE
EXT
PLAYER RECORDER
DISK MASTER buttons
When using the hard disk of this unit for recording or
playing back material before editing, specify the hard
disk as player or recorder. According as you wish to
specify the hard disk as player or recorder, hold down
the PLAYER or RECORDER button and press the
DISK MASTER button on the PLAYER side or
RECORDER side, turning it on.
The device selected by pressing these buttons is also
referred to simply as "MASTER".
TAPE buttons
To specify the VTR of this unit as player or recorder,
hold down the PLAYER or RECORDER button and
press the TAPE button on the PLAYER side or
RECORDER side, turning it on.
EXT (external) button
To specify the device connected to the REMOTE-
IN(9P) connector as player, hold down the PLAYER
button and press this button, turning it on.
3 Indicators
FULL EDIT/SIMPLE EDIT indicators
REC INHIBIT indicator
KEY INHIBIT indicator
SERVO indicator
FULL
DISK
EDIT PROGRAM
SIMPLE
DISK
EDIT
MASTER
REC
INHIBIT
TAPE
KEY
INHIBIT
EXT
SERVO
BETACAM SX indicator
DISK BUSY indicator
DISK
BUSY
BETACAM
SX
ALARM
ALARM indicator