Sony DNW-A100 Operation Manual page 101

Item number Item name
123 TAPE INDEX SELECT
124 SX TAPE
(Version 2.00 JOG MEMORY PB
or later)
Item number Item name
201 PARA RUN
Menu items in the 100s, relating to the control panels (continued)
Settings
Select the "UB marks" to which INDEX functions apply.
REC: Select REC START MARK.
SHOT1: Select SHOT MARK 1.
SHOT2: Select SHOT MARK 2.
ALL: Select REC START MARK, SHOT MARK 1, and SHOT MARK 2.
When the tape is cued up to a UB mark, the type of UB mark (REC,SHOT 1, or
SHOT 2) is displayed in the time data display area.
The UB marks are recorded by a Betacam SX camcorder. For more information
about the UB marks, refer to the camcorder operation manual.
Set the jog memory storage method for digital tape jog, shuttle and variable
playback, and for standby-on/standby-off status.
AUTO : In order to store playback signals in jog memory, run the tape
automatically according to tape status.
MANU: Store playback signals in jog memory according to tape playback speed.
This unit performs slow and still playback using data stored in memory called jog
memory. For example, to display a still picture when switching from standy-off
status to standby-on status, playback signals must be stored in jog memory by
setting this item to AUTO so that the unit will run the tape automatically.
Note
When this item is set to AUTO, it may not be possible to carry out cue up
correctly from editors such as the BE-800. If this occurs, set this item to MANU.
Menu items in the 200s, relating to the remote control interface
Settings
Select whether or not to use synchronized operation for two or more VTRs.
DIS: No synchronized operation.
ENA: Use synchronized operation.
Note
To use synchronized operation for two or more VTRs, set item 201 to "ENA" on
all of the VTRs.
7-11
Chapter 7 Menu System