AUDIO AES/EBU optional connectors (with
optional BKNW-105)
Complies with AES-3id-1995.
AES/EBU INPUT BNC (2)
AES/EBU OUTPUT
BNC (2)
Notes
• You cannot use the BKNW-104 Analog Component
Input Board and the BKDW-505/506 Analog
Composite Decoder Board at the same time.
• You cannot use the AUDIO AES/EBU optional
connectors (with optional BKNW-105) and the
AUDIO INPUT/OUTPUT CH-1/2/3/4 connectors at
the same time.
• When the AUDIO AES/EBU option (BKNW-105) is
installed, an XLR/BNC converting connector is
required to connect this unit to a device with an XLR
connector. (Use Canare BCJ-XJ-TRA, BCJ-XP-TRA
or compatible converting connector.)
Remote connectors
REMOTE (9P)
D-sub 9-pin, female
RS232C
D-sub 25-pin, female
VIDEO CONTROL
D-sub 15-pin, male (for optional
BVR-50/50P)
SCSI
68-pin, female
Accessories supplied
AC power cord (1)
PSW 4 × 16 screws for rack mounting (4)
Operation Manual (1)
Maintenance Manual Part 1 (1)
Optional accessories
BKDW-505/506 Analog Composite Decoder Board
BKNW-103 SDDI Input Kit
BKNW-104 Analog Component Input Board
BKNW-105 AES/EBU I/F Kit
BVR-50/50P TBC Remote Controller
RMM-110/111 Rack Mount Adaptor
BCT-5CLN Cleaning Cassette Tape
RCC-5G 9-pin Remote Control Cable
Design and specifications are subject to change
without notice.
A-5
Appendix