Sony DNW-A100 Operation Manual page 107

Menu items in the 600s, relating to the time code generator (Continued)
Item number Item name
608 PHASE CORRECTION
609 TCG CF FLAG
610 REGEN CONTROL
MODE
Settings
Select whether or not to carry out phase correction control on the LTC generated
by the time code generator.
OFF : No control.
ON: Carry out control.
Select whether or not the color framing flag is set in the blank bit of the time code
data.
OFF : Color framing flag is not set.
ON: Color framing flag is set.
AUTO: Color framing flag is set or not depending upon the color framing phase
relationship between the recorded video signal and the time code signal.
When AUTO is selected, color framing is controlled as follows according to the
operating mode of the time code generator.
• In INT PRESET mode (the INT/EXT switch is set to INT, the PRESET/REGEN
switch is set to PRESET, and in modes other than the automatic editing mode):
the time code signal is generated with color framing locked to the video signal,
and the color framing flag is set.
• In INT REGEN mode (the INT/EXT switch is set to INT, the PRESET/REGEN
switch is set to REGEN, and in the automatic editing mode), and also in EXT
mode (the INT/EXT switch is set to EXT): the time code signal is generated with
color framing locked to the video signal, and the color framing flag is not set.
In editing performed using the control panel of this unit, select whether or not the
time code is automatically regenerated (valid only when the recorder is TAPE).
AS&IN : In editing with this unit as the recorder, regardless of the setting of the
PRESET/REGEN switch, in assemble and insert editing, the time code
generator regenerates according to the time code on the tape.
ASSEM: In editing with this unit as the recorder, regardless of the setting of the
PRESET/REGEN switch, in assemble editing only, the time code generator
regenerates according to the time code on the tape.
MANU: Regardless of whether this unit is the recorder or player, the time code
generator operates in accordance with the setting of the INT/EXT switch.
FULL: Regardless of whether local or remote, when any of the ASSEMBLE/ALL,
VIDEO, and AUDIO CH1 to CH4 buttons is lit, the time code generator
regenerates on the time code played back from the tape.
7-17
Chapter 7 Menu System