Sony DNW-A100 Operation Manual page 111

(Items 715 to 721: Settings for controlling the video processing system according to the menu settings.)
Item number Item name
715 VIDEO GAIN CONTROL
716 CHROMA GAIN
CONTROL
717 CHROMA PHASE
CONTROL
718 SETUP LEVEL
719 SYSTEM PHASE SYNC
720 SYSTEM PHASE SC
721 Y/C DELAY
Note
When you make settings for items 715 to 721, set the
PROCESS CONTROL switch on the subsidiary
Item number Item name
723 INPUT VIDEO BLANK
Sub-Item
0
ALL LINE
In 525 mode 12 ... LINE 12 ... LINE
20 20
9
In 625 mode
LINE 9
10 ... LINE 10 ... LINE
21 21
22 LINE 22
Menu items in the 700s, relating to video control (Continued)
Settings
Adjust the video output level.
Default value: 800H
Adjust the chroma output level.
Default value: 800H
Adjust the chroma phase.
Default value: 80H
Adjust the setup level (black level).
Default value: 110H
Adjust the SYNC control on the subsidiary control panel.
Default value: 80H
Adjust the SC control on the subsidiary control panel.
Default value: 0H
For playback from an analog Betacam cassette, adjust the Y/C delay.
Default value: 800H
Settings
Switch blanking on or off for individual lines in the vertical blanking interval of an
input video signal. The Y/C signal and odd/even fields are blanked
simultaneously.
A signal with blanking carried out according to this setting is recorded.
- - - : Specify the blanking for each line separately.
BLANK: Regardless of the setting of other sub-items, blank all lines which can be
specified in this menu item.
THROU: Regardless of the setting of other sub-items, switch off blanking for all
lines which can be specified in this menu item.
Specify blanking for lines 12 to 20.
BLANK: Carry out blanking.
THROU : Switch off blanking.
Specify blanking for line 9.
BLANK: Carry out blanking.
THROU : Switch off blanking.
Specify blanking for lines 10 to 21.
BLANK: Carry out blanking.
THROU : Switch off blanking.
Specify blanking for line 22.
BLANK: Carry out blanking.
THROU : Switch off blanking.
control panel to MENU. When set to MENU, all
controls on the subsidiary control panel are disabled.
(Continued)
7-21
Chapter 7 Menu System