Humidity Sensor - Whirlpool SPEEDCOOK GH6208 XR Technical Education

8. To remove the cavity thermostat and

humidity sensor:

NOTE: The cavity thermostat and humid-
ity sensor are serviced as an assembly.
a) Lift and unhook the clip at the rear of
the mounting bracket for the cavity
thermostat and humidity sensor.
Humidity Sensor
Mounting Bracket
Clip
Cavity Thermostat
4-23
b) Disconnect the wires from the cavity
thermostat terminals.
c) Remove the sensor wires from the
standoffs at the top of the chassis.
RD & BU
Standoff
Cavity Thermostat
d) Disconnect the humidity sensor con-
nector at relay control board plug P68,
and remove the bracket with the cavity
thermostat and humidity sensor.
Humidity Sensor Connector P68
BU