Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
FC MOTOR
Refer to page 4-19 for the procedure for ac-
cessing the FC motor.
1.
Unplug microwave oven or disconnect
power.
2.
Disconnect one of the wires from the FC
motor terminals.
3.
Set the ohmmeter to the R x 100K scale.
4.
Touch the ohmmeter test leads to the FC
motor connector pins. The meter should
indicate 21.5 ±5 Ω.
Electrical Shock Hazard
FC RING HEATER
Refer to page 4-19 for the procedure for ac-
cessing the FC ring heater.
1.
Unplug microwave oven or disconnect
power.
2.
Disconnect one of the wires from the FC
ring heater terminals.
Set the ohmmeter to the R x 1 scale.
3.
4.
Touch the ohmmeter test leads to the FC
ring heater terminals. The meter should
indicate 9 ±2 Ω.
5-4