Whirlpool SPEEDCOOK GH6208 XR Technical Education page 44

c) Remove the two T10 torx screws from
the electronic control cover and re-
move the cover from the door.
Electronic Control Cover Screws
d) Disconnect the wire connectors be-
tween the user interface and the LCD
display boards.
User Interface Board
4 Board Connectors
e) Remove the two screws from the
user interface board and remove the
board.
User Interface Board Screws
LCD Display Board
f) Release the four clips from the LCD
display board and remove it from the
door frame.
LCD Display Board Clips
g) Remove the two T20 torx screws and
washers from the door handle and re-
move the handle.
h) Remove the three T20 torx screws
from the top trim of the door and re-
move the trim.
Remove Top Trim
4-12
Door Handle Screws
3 Door Top
Trim Screws