Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug microwave oven or disconnect
power.
2.
Remove the twelve T10 torx screws from
the bottom cover.
Screw (1 of 12)
Bottom Cover Assembly
REMOVING THE BOTTOM COVER
3.
Partially lower the front of the cover and
disconnect the connector from the turnta-
ble motor terminals, then lower the cover
the rest of the way.
4.
Disconnect the power connector from the
bottom of the microwave oven.
5.
Unhook the bottom cover assembly from
the microwave oven and remove it.
Turntable Motor
Connector
Unhook Edge Of
Bottom Cover
4-2
Power
Connector