Removing The Fc (Forced Convection) Thermoactuator, The Magnetron; Thermistor, And The Magnetron - Whirlpool SPEEDCOOK GH6208 XR Technical Education

REMOVING THE FC (FORCED CONVECTION)
THERMOACTUATOR, THE MAGNETRON

THERMISTOR, AND THE MAGNETRON

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug microwave oven or disconnect
power.
2. Remove the microwave oven from its
mounting location (see page 4-17 for the
procedure).
3. Remove the cabinet from the microwave
oven (see page 4-18 for the procedure).
Magnetron
FC Thermoactuator
Thermistor
Magnetron
4. To remove the FC thermoactuator:
a) Remove the right cover and panel (see
page 4-7 for the procedure).
b) Remove the top (secondary) door
switch assembly (see page 4-16 for
the procedure).
c) Press the locking tabs and disconnect
the two wire connectors from the FC
thermoactuator terminals.
FC Thermoactuator
Wires
d) Using a 90° T10 Allen wrench, remove
the two FC thermoactuator screws, and
remove the motor from the housing.
90° Allen
Wrench
FC Thermoactuator
Screws
4-27
Continued on the next page.