Whirlpool SPEEDCOOK GH6208 XR Technical Education page 43

g) Pull the wires and the UIB connector
out through the chassis cutout, and
position the oven door with the top
edge facing you.
4. To remove the inner panel from the
oven door:
a) Remove the eight flat-head screws
from the sides and bottom of the oven
door trim.
3 Side
Screws
(Each side)
b) Using a putty knife, pry out on the out-
Lift Inner Panel & Remove
2 Bottom
Screws
4-11
er door frame along the top to release
the retainer clips. Then use a regular
screwdriver and pry the side of the in-
ner panel up, and lift the panel assem-
bly out of the door frame.
Pry Out Top
Of Door Frame
Continued on the next page.
Pry Side Of
Inner Panel
Up