Removing The Power Supply Cord And Ac Line Filter - Whirlpool SPEEDCOOK GH6208 XR Technical Education

REMOVING THE POWER SUPPLY CORD AND AC LINE FILTER

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug microwave oven or disconnect
power.
2. Remove the microwave oven from its
mounting location (see page 4-17 for the
procedure).
3. Remove the cabinet from the microwave
oven (see page 4-18 for the procedure).
4. Remove the top cover from the micro-
wave oven ( see page 4-22 for the proce-
dure).
AC Line Filter &
Power Supply Cord
4-26
5. To remove the power supply cord:
a) Disconnect the white wire on the pow-
er supply cord from the AC line filter
board at terminal P31, and the black
wire at terminal P32.
b) Remove the chassis screw from the
green ground wire on the power sup-
ply cord.
Ground Wire
AC Line Filter Board
6. To remove the AC line filter:
a) Disconnect the white and black power
supply cord wires from the AC line fil-
ter board (see above).
b) Disconnect the brown wire from the AC
line filter board at terminal P33, and
the two blue wires at terminal P34.
c) Remove the chassis screw from the
yellow/green ground wire.
d) Remove the screw from the AC line fil-
ter board and remove the board from
the microwave oven.
Ground Screw
BR (P33)
Board Screw
2 BU (P34)
BK (P32)
Power Supply
Cord
WH (P31)