Quick Start; Unpack; Charging The Wws110I; Connecting The Scanner To A Bluetooth Device - Wasp WWS110i Quick Start Manual

QSG QSG

Quick Start

1. Unpack

Open the box and remove all the pieces from their protective packaging.

2. Charging the WWS110i

You must charge the scanner for 4 hours before first using it. To charge
the scanner, plug the power supply into the bottom of the scanner.

3. Connecting the scanner to a Bluetooth device

The scanner will connect to most Bluetooth devices that support HID
connection.
You will need to open your Bluetooth software and search for Bluetooth
devices. The Bluetooth software can be found by clicking the Bluetooth
symbol on the start bar near the computer time. If the Bluetooth symbol is
not found, there could be a problem with the Bluetooth adapter installation.
2 2