Exiting The Mode Configuration Menu - Kodak digital science 7500 Installation Instructions Manual

Exiting the mode
configuration menu
A-61074 April 1997
When all of the mode configuration options have been defined for
current mode, you will exit the Mode Configuration window.
Select one of the options listed below from the Mode Configuration
window:
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs
IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA Footswitch
Save & End Session
Save & Prev Menu
— Save & End Session— results in all definitions made during the
session being saved and returning to the DOS prompt.
— Save & Previous Menu— results in all definitions made during the
session being saved and returning to the Configuration Selection
window.
— Don't Save & End Session— results in none of the definitions
made during the session being saved and returning to the DOS
prompt.
— Don't Save & Previous Menu— results in none of the definitions
made during the session being saved and returning to the
Configuration Selection window.
— Press Enter after making your selection.
Item #: 0.0
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
3-69