Confirmation Tone - Kodak digital science 7500 Installation Instructions Manual

Confirmation tone

A-61074 April 1997
Confirmation tone enables or disables the confirmation tone which
sounds when the bar code reader detects a bar code document.
The default for all modes is Disable.
The options are:
— Disable— no tone will sound when a bar code document is
detected.
— Enable— a tone will sound when a bar code document is
detected.
Select Confirmation Tone from the Bar Code Reader menu.
Mode Number: 01 Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Select Disable or Enable.
Press Enter.
Item #: 13.8
Patch Reader Off
COIN2 Port Select n/a
OCR n/a
Bar Code Reader Off
Printr Controller Supprs
Front Printer Off
Rear Printer Off
Mode Name MODE0
Overrides No Sav
Don't Save & End Session
Don't Save & Prev Menu
Bar Code Reader
On/Off
Bar Code Type
Codes Per Document
Minimum Code Length
Maximum Code Height
Scan Direction
Code Quality
Confirmation Tone
Bar Code Location
Previous Menu
Confirmation tone
Disable
Enable
Previous Menu
3-51