User Mode; Entering And Exiting The User Mode - Kodak 2400 DV Plus User Manual

User mode

Entering and exiting the
User mode
B-2
User mode allows the default values of various functions to be set or
changed as necessary. Most of these functions are set-up and changed
by your Kodak representative, however some User modes can be
changed by you.
Setting these default values according to your needs saves time and
allows you to work more efficiency. The following modes can be set:
Display Function
U1 Special Print mode
U2 Engineering Enhancement
mode
U3 Auto Power Save
U4 Paper Feeding Tray Size
U5 Imprint Position Setting
U6 Year, Month, Date Set mode Used to set the print pattern for the Date
U7 Imprint mode set
U8 Total Scan Counter
1. Hold down the Shift key and Output Selection key at the same
time for 0.5 seconds. The Multi-Print Display displays a "U".
O utput
S election
U ser M ode
2. Press the Exposure Adjustment key (Darker or Lighter) to select
the specific function.
• Pressing the Darker key scrolls through the functions in the
following order: U, U1, U2, U3 ... U8
• Pressing the Lighter key scrolls through the functions in the
following order: U8, U7, U6, U5 ... U
Description
Not available.
Corrects slight image distortion occurring
in the scan direction.
Used to set the time it takes the unit to be
automatically set into the Auto Power
Save mode.
Used to set the size and direction of the
paper loaded in the paper feeding tray.
Used to turn ON or OFF the Date Print
and Character Overlay functions and to
set the Date Print position.
Print function.
Used to correct the time of day for the
Date Print function.
Used to display the number of scan
sequences carried out by the scanner.
S hift
A-61316 April 2010