Level transfer on T-Patch
A-61074 April 1997
Level transfer on T-Patch defines whether the transfer patch
definition is applied to the document containing the transfer patch or
the next document fed into the Scanner 5500/7500.
The default for all modes is Disabled.
The options are:
— Disabled— indicates that the next document fed into the Scanner
5500/7500 will be assigned the document level defined by the
Transfer Patch Definition option.
— Enabled— indicates that the document containing the transfer
patch will be assigned the document level defined by the
Transfer Patch Definition option.
NOTE: If the Transfer Patch Definition option is enabled, Level 1,
Level 2, or Level 3 must be defined.
Select Level Transfer on T-Patch from the Patch Reader menu.
Mode Number: 01
Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs
IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
Select Disable or Enable .
Press Enter.
Item #: 10.4
Patch Reader
Off
COIN2 Port Select
n/a
OCR
n/a
Bar Code Reader
Off
Printr Controller
Supprs
Front Printer
Off
Rear Printer
Off
Mode Name
MODE0
Overrides
No Sav
Don't Save & End Session
Don't Save & Prev Menu
Patch Reader
On/Off
Transfer Patch Definition
Confirmation Tone
Level Transfer on T-Patch
Previous Menu
Level X-Fer On T-Patch
Disable
Enable
Previous Menu
3-41