Confirmation Tones - Kodak digital science 7500 Installation Instructions Manual

Confirmation tones

A-61074 April 1997
Confirmation tones enables or disables all confirmation tones (for
footswitch, patch reader and bar code reader).
The default is Enable .
The options are:
—Enable— indicates that confirmation tones may be used.
— Disable— indicates that confirmation tones may not be used.
Select Confirmation Tones from the Configuration Items window.
Configuration Items
Display Language
Measurement System
Date Format
Time Format
Set Time and Date
Confirmation Tone Volume
Confirmation Tones
Fixed Field Delimiter
Printer Messages
Load scanner from laptop
Load laptop from scanner
Previous Menu
Select Disable or Enable.
NOTE: If you select Disable , all confirmation tones are permanently
disabled. If you select Enable , any confirmation tone
(footswitch, patch reader, or document scanning array/bar
code reader) must also be enabled at the mode level using
the appropriate Mode Configuration item.
DIGITAL SCIENCE Status
Setting
READY
English
Inch
1990/10/10
00:00
Soft
Enabled
Period (.)
Confirmation Tones
Disable
Enable
Previous Menu
2-9