Attaching The Output Tray And Special Document Feeder; Powering Up The Scan Station - Kodak SCAN STATION 100 User Manual

Attaching the output tray
and special document
feeder
Powering up the Scan
Station
1-14
1. Locate the output tray holes on the Scan Station.
2. Insert the pin on the left side of the output tray/special document
feeder in the hole, then press the ribbed button on the right side of
the output tray/special document feeder and insert the pin in the
hole on the right side of the Scan Station.
Turn the power on and wait a few moments while the device completes
it's self tests.
The Scan Station is now ready to have a configuration file downloaded
to it by your administrator. See Chapter 4, Administrative Functions, for
information on how to create and download configuration files to the
Scan Station.
A-61544 April 2006