Testing Your Configuration File - Kodak SCAN STATION 100 User Manual

Testing your
configuration file
A-61544 April 2006
Once you have created the configuration file, added any destinations
you want, selected your preferred device settings and setup a
password, save and test the file.
1. Select File>Save. The Save Configuration To dialog box will be
displayed.
2. Select the location(s) you want to save the configuration file to. If
necessary, use the Browse button to help you locate the folder.
3. Click Save.
4. When finished, exit the Configuration Organizer and remove your
USB flash drive from the PC.
5. Test your USB flash drive by inserting it into the USB port on the
Scan Station. When the Scan Station recognizes a valid
configuration file, it will display new icons for each of your custom
destination settings in the Destination mode screen.
6. You can also verify that any custom device settings you selected are
in effect by pressing the Settings button on the Destination mode
screen and reviewing the device settings in the Settings mode
screen.
3-23