Kodak SCAN STATION 100 User Manual page 78

4-14
7. By default, all listed groups will be selected for update, therefore,
unselect the group(s) you do not want to update. There are four
types of updates: Replace, Move, Add, and Delete.
• Replace: this is when a group is in the same position in the flash
drive configuration file as it is in the device configuration file, but
the two lists are not the same (e.g., adding item to the list).
• Move: this is when a group is not in the same position in the
flash drive configuration file as it is in the device configuration
file, but the two lists are the same (e.g., changing order of
groups).
• Add: this is when a group exists in the flash drive configuration
file and is not in the device configuration file (e.g., adding a new
group to the device).
• Delete: this is when a group exists in the device configuration file
and is not in the flash drive configuration file (e.g., removing
group from the device).
If a group is in the same position in both configuration files and the
entire group matches, then the group will not be listed on this dialog
box.
The destination groups will be displayed in the order they appear in
the flash drive's configuration file (i.e., for Replace/Move/Add),
followed by the ones to be removed (i.e., Delete).
8. Click Update.
A-61544 April 2006