Kodak SCAN STATION 100 User Manual page 27

2-8
Bottom of the Destination mode screen
The button on the bottom of the screen allows you to toggle from the
Destination mode to the Settings mode.
The icons at the top of the screen will change depending on where you
are in Settings mode or Destination mode. The icons to the right of the
Settings button represent the current settings that will be used the next
time a document is scanned.
If you want to change any of the Scan Station settings (i.e., to send your
document in color instead of black-and-white), touch the Settings
button to display the Settings screen, select the Scan As icon and then
choose Color.
NOTE: If you use your own USB flash drive, the settings you have
selected for your personal configuration will override the default
configuration on the Scan Station. This saves you time since
you will not need to adjust the settings for your jobs very often.
You can still make adjustments to the settings at anytime, if
needed.
For more information about changing settings from the default values,
refer to the section entitled, "Customizing settings for your scan
session" later in this chapter.
A-61544 April 2006