Adjusting the output tray
for document lengths up to
43.2 cm (17 in.)
Positioning the output tray
3-8
Adjusting for document length involves selecting an output tray position
and angle, positioning the end stop, or removing the end stop and
installing a document extender. Reviewing the following table will help
you determine the best position for your output tray and your stacking
needs.
Position
Stacking capacity
1
Up to 250 documents
2
Up to 500 documents
3
Up to 500 documents
There are three positions that the output tray can be placed in.
1. Lift the front of the output tray and pull it out of position.
2. Set the back of the tray either in the upper position (1), lower
position (2) or forward position (3) as desired.
Maximum document
length with end stop
35.6 cm (14 in.)
35.6 cm (14 in.)
43.2 cm (17 in.)
2
A-61555 May 2010
1
3