Cleaning The Rollers; Cleaning The Feed Module - Kodak SCAN STATION 100 User Manual

Cleaning the rollers

Cleaning the feed module

5-2
1. With a roller cleaning pad, wipe the feed roller from side to side.
Rotate the feed rollers to clean the entire surface.
IMPORTANT: The roller cleaning pad contains sodium lauryl ether
sulfate which can cause eye irritation. Refer to the MSDS
for more information.
2. Dry the rollers with a lint-free cloth.
1. Squeeze the plastic clamps that hold the feed module in place and
lift the feed module out of position.
2. Wipe the feed module from top to bottom with a roller cleaning pad.
3. Reinsert the feed module into position, by aligning it into the slots
and pushing it in until it snaps into place.
A-61544 April 2006