Removing The Lsd Module - Fujitsu PRIMERGY TX2540 M1 Upgrade And Maintenance Manual

Accessible drives and LSD
Ê Ensure that the four pins on the frame (see arrows) engage with the side
holes on the dummy insert.
Ê Insert the slimline ODD dummy module into the Multibay box and push back
until the locking tab engages as shown in

12.5.2.4 Removing the LSD module

Figure 230: Removing the 3.5-inch installation frame from the Multibay box (A)
Ê Remove two screws on either side of the Multibay box to disengage the 3.5-
inch installation bay.
Figure 231: Removing the 3.5-inch installation frame from the Multibay box (B)
Ê Slide the 3.5-inch installation frame out of the Multibay box as shown.
314 Upgrade and Maintenance Manual
figure 219 on page 306.
TX2540 M1