Table of Contents
Advertisement
3
BIOS Setup
3.1.6.4 IRQ Resources
Move the cursor to this field and press <Enter>. This field is used to
set each system interrupt to either Reserved or PCI Device.
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.6.5 PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can
work with PCI/VGA or not.
Enabled MPEG ISA/VESA VGA cards work with PCI/VGA.
Disabled MPEG ISA/VESA VGA cards does not work with PCI/
3.1.6.6 Assign IRQ for VGA
When Enabled, the system automatically assigns an IRQ for the VGA
card installed. Your VGA card will need an IRQ only when using the
video capture function of the card. If you are not using this function
and a new device requires an IRQ, you can set this field to Disabled.
The IRQ (previously occupied by the VGA card) will be available for
your new device.
Note:
When Disabled, a "Yellow" mark will appear in Windows
Device Manager.
82
VGA.
95's
Advertisement
Table of Contents
