Table of Contents
Advertisement
3
BIOS Setup
3.1.4.3 Super IO Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
Onboard FDC Controller
Enabled
Disabled
Onboard Serial Port 1 and Onboard Serial Port 2
Auto
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manu-
Disabled Disables the onboard serial port 1 and/or serial port 2.
UART Mode Select
This field is used to select the type of IrDA standard supported by
your IrDA device. For better transmission of data, your IrDA
peripheral device must be within a 30
of 1 meter.
72
Enables the onboard floppy disk controller.
Disables the onboard floppy disk controller.
The system will automatically select an I/O address for
the onboard serial port 1 and serial port 2.
ally select an I/O address for the onboard serial port 1
and serial port 2.
o
angle and within a distance
Advertisement
Table of Contents
