Table of Contents
Advertisement
2
Hardware Installation
2.5.4 IEEE 1394 (optional)
1394_1
1394_2
The system board is equipped with an onboard IEEE 1394 port at
location CN6 (IEEE 1394_1) of the system board.
It is also equipped with an IEEE 1394 connector at location J9
(1394_2) for connecting an additional 1394 device. Your 1394 port
may come mounted on a card-edge bracket. Install the card-edge
bracket to the system chassis then insert the connector that is
attached to the 1394 port cable to J9. Make sure pin 1 of the
cable connector is aligned with pin 1 of the J9.
BIOS Setting
Enable or disable the onboard 1394 in the Integrated Peripherals
submenu ("VIA OnChip PCI Device" section) of the BIOS. Refer to
chapter 3 for more information.
32
1 0
2
1
9
Advertisement
Table of Contents
