Table of Contents
Advertisement
2
Hardware Installation
2.6.6 IrDA Connector
N. C.
VCC
1
Connect your IrDA cable to connector J5 on the system board.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable to the IrDA connector
according to their pin functions.
BIOS Setting
Configure IrDA in the Integrated Peripherals submenu ("Super IO
Device" section) of the BIOS. Refer to chapter 3 for more
information.
Driver Installation
You may need to install the proper drivers in your operating system
to use the IrDA function. Refer to your operating system's manual or
documentation for more information.
44
IRRX
Ground
IRTX
5
Advertisement
Table of Contents
