Table of Contents
Advertisement
2
Hardware Installation
2.6.2 S/PDIF-in/out Connector
SPDIF out
Key
GND
+5V
SPDIF in
1
5
The S/PDIF-in/out connector (J4) is used to connect external S/PDIF
ports. Your S/PDIF ports may be mounted on a card-edge bracket.
Install the card-edge bracket to the system chassis then connect the
audio cable connector to J4. Make sure pin 1 of the audio cable
connector is aligned with pin 1 of J4.
39
Advertisement
Table of Contents
