Table of Contents
Advertisement
3
BIOS Setup
1T/2T Memory Timing
2T timing which provides better system stability is supported in CG
or later revisions of the AMD Athlon
or 2T memory timing in this field. This field will not appear if you are
using a CPU whose version is older than the CG revision.
Auto Automatically detects the memory timing.
1T
Sets the memory timing to Performance mode. Select this
mode for better system performance.
2T
Sets the memory timing to Normal mode. Select this
mode if you encounter system instability. (default)
CAS# Latency (Tcl)
This field is used to select the clock cycle of the CAS latency time.
The option selected specifies the time before SDRAM starts a read
command after receiving it.
RAS# to CAS# Delay (Trcd)
This field is used to select the RAS# to CAS# delay time when
reading and writing to the same bank.
Min RAS# Active Time (Tras)
This field is used to select the minimum RAS# active time.
Row Precharge Time (Trp)
The field is used to select the row precharge time (precharge to
active or auto-refresh of the same bank.)
62
TM
64 CPU. You can select 1T
Advertisement
Table of Contents
